Typically, the pin shaft birthing bushing is very easy to wear, the streaming has slight deterioration, and also the center of it constantly has no wear. so just how to avoid it to put on is extremely vital:

1. According to the instruction, to adjust the gap of eccentric shaft bearing, when to check as well as upkeep, you can make lower space of cone bushing bigger, at the exact same time ensure the leading space.
2. When do the upkeep, you ought to make sure the density of up, center, down the same.
Adjust the bevel equipment clearance to make sure the attire of gasket.
3. Prior to beginning the equipment, to guarantee the gearing wheel flexibility, and after the device working usually, after that feed into the crushed products.
4. Prior to stop the machine, should let the maker discharge all the materials from crushing chamber, and after that turn off the power.
5. Pay focus to the bearing's temperature level, and also ensure the bearing in the good lubrication problem. As well as likewise need to pay focus to the noisy and also resonance. Stop the machine in time and examine if there is anything stuck in the device or there is any kind of part harmed if there is something unmoral.
6. Maintain feeding equally; prohibit the steel, wood and various other unbreakable products into the squashing chamber.
7. If the final result dimension is much bigger than called for, you need to discover the factor, as well as eliminate this sensation.
8. When quit the crusher, you should examine whether the screw hangs, the wearing components' damageable degree. And replace the using components in time and so forth.